Author: Ibarra, A.
Paper Title Page
Overview of LIPAc Beam Instrumentation for the Initial Accelerator Commissioning  
  • D. Jimenez-Rey, J. Castellanos, J.M. García, D. Gavela, A. Ibarra, A. Marqueta, L.M. Martínez, J. Mollá, I. Podadera, A. Ros, R. Varela, V. Villamayor
    CIEMAT, Madrid, Spain
  • P. Abbon, B. Bolzon, T. Chaminade, J.F. Denis, A. Gaget
    CEA-DRF-IRFU, France
  • T. Akagi, K. Kondo, K. Sakamoto, Y. Shimosaki, M. Sugimoto, S. Takahiro
    QST, Aomori, Japan
  • L. Bellan, M. Comunian, E. Fagotti, F. Grespan, M. Poggi, F. Scantamburlo
    INFN/LNL, Legnaro (PD), Italy
  • P. Cara, A. Marqueta
    Fusion for Energy, Garching, Germany
  • Y. Carin, H. Dzitko, A. Jokinen, I.M. Moya
    F4E, Germany
  • J. Marroncle
    CEA-IRFU, Gif-sur-Yvette, France
  • O. Nomen
    IREC, Sant Adria del Besos, Spain
  • A. Rodríguez Páramo
    ESS Bilbao, Zamudio, Spain
  Funding: This work has been supported by the Spanish Government in the frame of the Broader Approach Agreement
The commissioning of the high power deuterium accelerator of Linear IFMIF Prototype Accelerator, LIPAc, is presently under progress. During the so-called Phase B, the accelerator is operating with a high current pulsed proton and deuteron. The Phase B operation has the goals of fulfilling an exhaustive characterization of equipment and machine parameters in pulsed beam operation up to 5 MeV and 125 mA at Low Duty Cycle. The LIPAc beam diagnostics are aimed to demonstrate at this first stage of the commissioning the correct performance of the accelerator and are used for a complete characterization of the accelerator matching and tuning parameters. The characterization and calibration of beam diagnostics developed are providing relevant feedback of the accelerator operation. Measurements of the centroid position, beam profile, energy, intensity or emittance have been acquired and analyzed. The experimental results gathered have been compared with beam dynamics simulations. In this contribution, an overview of the main results provided by the beam diagnostics during Phase B operation in proton will be shown, together with the status of each instrument.
slides icon Slides MOBO03 [13.512 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
MOPP042 Beam Diagnostics for the Multi-MW High Energy Beam Transport Line of DONES 201
  • I. Podadera, A. Ibarra, D. Jiménez-Rey, J. Mollá, C. Oliver, R. Varela, V. Villamayor
    CIEMAT, Madrid, Spain
  • O. Nomen, D. Sánchez-Herranz
    IREC, Sant Adria del Besos, Spain
  Funding: Work carried out within the framework of the EUROfusion Consortium and funded from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No 633053.
In the frame of the material research for future fusion reactors, the construction of a simplified version of the IFMIF plant, the so-called DONES (Demo-Oriented Neutron Early Source), is under preparatory phase to allow materials testing with sufficient radiation damage for the new design of DEMO. The DONES accelerator system will deliver a deuteron beam at 40 MeV, 125 mA. The 5 MW beam will impact onto a lithium flow target to form an intense neutron source. One of the most critical tasks of the accelerator is the beam diagnostics along high energy beam transport, especially in the high radiation areas close to the lithium target. This instrumentation is essential to provide the relevant data for ensuring the high availability of the whole accelerator system, the beam characteristics and machine protection. Of outmost importance is the control of the beam characteristics impinging on the lithium curtain. Several challenging diagnostics are being designed and tested for that purpose. This contribution will report the present status of the design of the beam diagnostics, focusing on the high radiation areas of the high energy beam transport line.
DOI • reference for this paper ※  
About • paper received ※ 04 September 2019       paper accepted ※ 07 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)