Author: Schwickert, M.
Paper Title Page
MOPP007 Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR 77
 
  • D.M. Haider, F. Kurian, M. Schwickert, T. Sieber, T. Stöhlker, F. Ucar
    GSI, Darmstadt, Germany
  • H. De Gersem, N. Marsic, W.F.O. Müller
    TEMF, TU Darmstadt, Darmstadt, Germany
  • J. Golm
    FSU Jena, Jena, Germany
  • J. Golm, T. Koettig
    CERN, Geneva, Switzerland
  • M. Schmelz, R. Stolz, V. Zakosarenko
    IPHT, Jena, Germany
  • T. Stöhlker
    IOQ, Jena, Germany
  • T. Stöhlker, V. Tympel
    HIJ, Jena, Germany
  • V. Zakosarenko
    Supracon AG, Jena, Germany
 
  Funding: Work supported by AVA - Accelerators Validating Antimatter the EU H2020 Marie-Curie Action No. 721559 and by the BMBF under contract No. 05P15SJRBA and 5P18SJRB1.
The Cryogenic Current Comparator (CCC) extends the measurement range of traditional non-destructive current monitors used in accelerator beamlines down to a few nano-amperes of direct beam current. This is achieved by a cryogenic environment of liquid helium around the beamline, in which the beam’s magnetic field is measured with a Superconducting Quantum Interference Device (SQUID), which is itself enclosed in a superconducting shielding structure. For this purpose, a versatile UHV-beamline cryostat was designed for the CCCs at FAIR and is currently in production. It is built for long-term autonomous operation with a closed helium re-liquefaction cycle and with good access to all inner components. The design is supported by simulations of the cryostat’s mechanical eigenmodes to minimize the excitation by vibrations in an accelerator environment. A prototype at GSI has demonstrated the self-contained cryogenic operation in combination with a 15 l/day re-liquefier. The cryostat will be used in CRYRING to compare the FAIR-CCC-X with newly developed CCC-types for 150 mm beamlines. Both which will supply a nA current reading during commissioning and for the experiments.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP007  
About • paper received ※ 04 September 2019       paper accepted ※ 10 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPP008 First Measurements of a New Type of Coreless Cryogenic Current Comparators (4C) for Non-Destructive Intensity Diagnostics of Charged Particles 81
 
  • V. Tympel, T. Stöhlker
    HIJ, Jena, Germany
  • S. Anders, J. Kunert, M. Schmelz, R. Stolz, V. Zakosarenko
    IPHT, Jena, Germany
  • H. De Gersem, N. Marsic, W.F.O. Müller
    TEMF, TU Darmstadt, Darmstadt, Germany
  • J. Golm, F. Schmidl, T. Schönau, P. Seidel, M. Stapelfeld
    FSU Jena, Jena, Germany
  • D.M. Haider, M. Schwickert, T. Sieber, T. Stöhlker
    GSI, Darmstadt, Germany
  • T. Stöhlker
    IOQ, Jena, Germany
  • J. Tan
    CERN, Geneva, Switzerland
  • V. Zakosarenko
    Supracon AG, Jena, Germany
 
  Funding: Supported by the BMBF, project numbers 05P15SJRBA, 05P18RDRB1 and 05P18SJRB1.
The non-destructive and highly sensitive measurement of a charged particle beam is of utmost importance for modern particle accelerator facilities. A Cryogenic Current Comparator (CCC) can be used to measure beam currents in the nA-range. Therein, charged particles passing through a superconducting toroid induce screening currents at the surface of the toroid, which are measured via SQUIDs. Classical CCC beam monitors make use of a high magnetic permeability core as a flux-concentrator for the pickup coil. The core increases the pickup inductance and thus coupling to the beam, but unfortunately also raises low-frequency noise and thermal drift. In the new concept from the Leibniz Institute of Photonic Technology the Coreless Cryogenic Current Comparator (4C) completely omits this core and instead uses highly sensitive SQUIDs featuring sub-micron cross-type Josephson tunnel junctions. Combined with a new shielding geometry a compact and comparably lightweight design has been developed, which exhibits a current sensitivity of about 6 pA/sqrt(Hz) in the white noise region and a measured shielding factor of about 134 dB*.
* V. Zakosarenko et al., Coreless SQUID-based cryogenic current comparator for non-destructive intensity diagnostics of charged particle beams, Supercond. Sci. Technol. 32 (2019) 014002.
 
poster icon Poster MOPP008 [13.550 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP008  
About • paper received ※ 04 September 2019       paper accepted ※ 08 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPP027 First Beam-based Test of Fast Closed Orbit Feedback System at GSI SIS18 153
 
  • R. Singh, A. Doring, P. Forck, K. Lang, S.H. Mirza, D. Rodomonti, D. Schupp, M. Schwickert, H. Welker
    GSI, Darmstadt, Germany
  • A. Bardorfer
    I-Tech, Solkan, Slovenia
 
  Funding: European Unions Horizon 2020 Research and Innovation programme under Grant Agreement No. 730871 (ARIES). German Academic Exchange Service under Personal Reference No. 91605207.
The SIS18 synchrotron of GSI will be used as a booster ring for the SIS100 synchrotron built in the scope of the FAIR project. In order to preserve the beam quality during the whole acceleration ramp, a new closed orbit feedback (COFB) system is implemented at the SIS18 which operates with the existing BPMs and steerer magnets. The system aims for a bandwidth of several 100 Hz and robustness against the variation of the response matrix and the beam rigidity during the ramp. The architecture of the system and the results of the first beam-based test of the COFB hardware are presented. As a first step, the orbit correction is performed over the entire ramp using the response matrix corresponding to injection energy only taking the beam rigidity into account. Experimental observations of the bandwidth limitations arising from the temporal delay of the steerer power supplies and the spatial model variation during the ramp are compared with simulations. It is found that the temporal and the spatial model mismatch have similar effect on the achievable bandwidth of the COFB.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP027  
About • paper received ※ 07 September 2019       paper accepted ※ 08 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPP037 Status of Beam Instrumentation for FAIR HEBT 194
 
  • M. Schwickert, P. Boutachkov, T. Hoffmann, H. Reeg, A. Reiter, B. Walasek-Höhne
    GSI, Darmstadt, Germany
 
  At present the Facility for Antiproton and Ion Research (FAIR) is under construction at the GSI site. As part of the FAIR project the beamlines of the High Energy Beam Transport (HEBT) section interconnect the synchrotrons, storage rings and experimental caves. The large range of beam energies (MeV to GeV) and beam intensities up to 1012 particles per pulse for uranium, or up to 2·1013 particles per pulse for protons, demand in many cases for purpose-built beam diagnostic devices. Presently, the main diagnostic components are being manufactured by international in-kind partners in close collaboration with GSI. This contribution presents an overview of the beam instrumentation layout of the FAIR HEBT and summa-rizes the present status of developments for HEBT beam diagnostics. We focus on the status of the foreseen beam current transformers, particle detectors, scintillating screens and profile grids.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP037  
About • paper received ※ 04 September 2019       paper accepted ※ 07 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)