|MOCO02||Development of a Passive Cavity Beam Intensity Monitor for Pulsed Proton Beams for Medical Applications||40|
Funding: This work has been funded by the Innovation Department of Regione Lazio Government, Italy.
In this work the design of a passive cavity beam intensity monitor to be used in the TOP-IMPLART medical proton linac for the on-line measurement of beam current is presented. It will be used to monitor the beam between modules and at the linac exit. TOP-IMPLART produces a pulsed proton beam with 3 us duration at 200 Hz repetition rate with a current between 0.1 uA and 50 uA. The current required for medical applications is less than 1 uA and has to be known with an accuracy better than 5%. Large dynamic range and space constraints make the use of usual non-interceptive beam diagnostics unfeasible. The proposed system consists of a resonant cavity working in the TM010 mode, generating an electromagnetic field when the beam enters the cavity; a magnetic pickup senses an RF pulse whose amplitude is proportional to the current. The RF pulse is amplified and subsequently detected with zero-biased Schottky diodes. The cavity operates in vacuum when used in the inter-module space. The work reports also the results of preliminary measurements done on an copper prototype in air at the exit of the TOP-IMPLART linac to test the sensitivity of the system on the actual 35 MeV proton beam.
|Slides MOCO02 [3.269 MB]|
|DOI •||reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOCO02|
|About •||paper received ※ 03 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019|
|Export •||reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)|