Keyword: booster
Paper Title Other Keywords Page
MOCO02 Development of a Passive Cavity Beam Intensity Monitor for Pulsed Proton Beams for Medical Applications cavity, proton, linac, simulation 40
 
  • P. Nenzi, A. Ampollini, G. Bazzano, F. Cardelli, L. Picardi, L. Piersanti, C. Ronsivalle, V. Surrenti, E. Trinca
    ENEA C.R. Frascati, Frascati (Roma), Italy
 
  Funding: This work has been funded by the Innovation Department of Regione Lazio Government, Italy.
In this work the design of a passive cavity beam intensity monitor to be used in the TOP-IMPLART medical proton linac for the on-line measurement of beam current is presented. It will be used to monitor the beam between modules and at the linac exit. TOP-IMPLART produces a pulsed proton beam with 3 us duration at 200 Hz repetition rate with a current between 0.1 uA and 50 uA. The current required for medical applications is less than 1 uA and has to be known with an accuracy better than 5%. Large dynamic range and space constraints make the use of usual non-interceptive beam diagnostics unfeasible. The proposed system consists of a resonant cavity working in the TM010 mode, generating an electromagnetic field when the beam enters the cavity; a magnetic pickup senses an RF pulse whose amplitude is proportional to the current. The RF pulse is amplified and subsequently detected with zero-biased Schottky diodes. The cavity operates in vacuum when used in the inter-module space. The work reports also the results of preliminary measurements done on an copper prototype in air at the exit of the TOP-IMPLART linac to test the sensitivity of the system on the actual 35 MeV proton beam.
 
slides icon Slides MOCO02 [3.269 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOCO02  
About • paper received ※ 03 September 2019       paper accepted ※ 08 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPP026 A Longitudinal Kicker Cavity for the BESSY II Booster cavity, kicker, feedback, injection 149
 
  • T. Atkinson, M. Dirsat, A.N. Matveenko, A. Schälicke, B. Schriefer, Y. Tamashevich
    HZB, Berlin, Germany
  • T. Flisgen
    FBH, Berlin, Germany
 
  As part of the global refurbishment of the injector systems at BESSY II, a new longitudinal kicker cavity and suitable feedback will be installed in the booster. Both a flexible bunch charge and spacing is essential for efficient injection. Such a cavity is needed to mitigate the unwanted couple bunch instabilities associated with these elaborate filling patterns and the HOMs of additional accelerating structures. This paper covers the conceptual design, simulation strategy, manufacture and bench tests of the longitudinal kicker cavity before it is installed in the ring.  
poster icon Poster MOPP026 [4.756 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP026  
About • paper received ※ 02 September 2019       paper accepted ※ 07 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPP039 Horizontal and Vertical Emittance Measurements of the Advanced Photon Source Booster Synchrotron Beam at High Charge emittance, synchrotron, quadrupole, electron 415
 
  • K.P. Wootton, W. Berg, J.R. Calvey, K.C. Harkay, A.H. Lumpkin, A. Xiao, B.X. Yang, C. Yao
    ANL, Lemont, Illinois, USA
 
  Funding: This research used resources of the Advanced Photon Source, operated for the U.S. Department of Energy Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
In order to maximise the injection efficiency from the booster synchrotron into the proposed Advanced Photon Source Upgrade storage ring, beam-based optimisation of the booster electron optical lattice is anticipated. In the present work, we present non-destructive beam size and emittance measurements using the booster synchrotron light monitor and destructive quadrupole scan emittance measurements in the booster to storage ring transport line. Destructive measurements are performed with a 0.1 mm thickness Cerium-doped Yttrium Aluminium Garnet screen. In order to characterise performance, both the beam energy at extraction (5, 6 and 7 GeV) and the bunch charge are varied.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP039  
About • paper received ※ 04 September 2019       paper accepted ※ 08 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPP043 Time-of-flight Technique for Matching Energies in Electron Cooler electron, cavity, hadron, gun 641
 
  • I. Pinayev, R.L. Hulsart, K. Mernick, R.J. Michnoff, Z. Sorrell
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Electron cooler with bunched electron beam is being commissioned at the Relativistic Heavy Ion Collider at BNL. For the cooler to operate the energies of the hadron and electron beams should be matched with high accuracy. We have developed time-of-flight technique based on the phase measurement of the beam induced signal in the beam position monitors separated by a drift. We present the method description and experimental results.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP043  
About • paper received ※ 03 September 2019       paper accepted ※ 09 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)